Links

GitHub

Open HUB

Quick Links

Download

STREAMS

SIGTRAN

SS7

Hardware

SCTP

Related

Package

Manual

Manual Pages

References

Conformance

Performance

Documentation

Design

Status

FAQ

SIGTRAN Stack

BUA

ISUA

TUA

SUA

M3UA

M2UA

IUA

TALI

UA LM

References

Applications

SS7 Stack

ISDN Stack

SIGTRAN Stack

VoIP Stack

MG Stack

SS7/ISDN Devices

IP Transport

Embedded Systems

Operating System

Documentation

FAQ

SIGTRAN

Design

Conformance

Performance

References

Man Pages

Manuals

Papers

Home

Overview

Status

Documentation

Resources

About

News

SS7 MTP Level 3 User Adaptation Layer (M3UA)

Description: OpenSS7 References SIGTRAN Stack References.


rfc4666
.txt Signaling System 7 (SS7) Message Transfer Part 3 (MTP3) - User Adaptation Layer (M3UA)

This memo defines a protocol for supporting the transport of any SS7 MTP3-User signalling (e.g., ISUP and SCCP messages) over IP using the services of the Stream Control Transmission Protocol. Also, provision is made for protocol elements that enable a seamless operation of the MTP3-User peers in the SS7 and IP domains. This protocol would be used between a Signalling Gateway (SG) and a Media Gateway Controller (MGC) or IP-resident Database, or between two IP-based applications. It is assumed that the SG receives SS7 signalling over a standard SS7 interface using the SS7 Message Transfer Part (MTP) to provide transport. This document obsoletes RFC 3332.


draft-ietf-sigtran-rfc3332bis
05.txt
04.txt
02.txt
01.txt
00.txt
Signaling System 7 (SS7) Message Transfer Part 3 (MTP3) - User Adaptation Layer (M3UA)

This memo defines a protocol for supporting the transport of any SS7 MTP3-User signalling (e.g., ISUP and SCCP messages) over IP using the services of the Stream Control Transmission Protocol. Also, provision is made for protocol elements that enable a seamless operation of the MTP3-User peers in the SS7 and IP domains. This protocol would be used between a Signalling Gateway (SG) and a Media Gateway Controller (MGC) or IP-resident Database, or between two IP-based applications. It is assumed that the SG receives SS7 signalling over a standard SS7 interface using the SS7 Message Transfer Part (MTP) to provide transport.


draft-ietf-sigtran-m3ua-implementors-guide
07.txt
06.txt
04.txt
03.txt
02.txt
01.txt
00.txt
SS7 MTP3-User Adaptation Layer (M3UA)

This document contains a compilation of all defects found up until October 2002 for the M3UA [RFC3332]. These defects may be of an editorial or technical nature. This document may be thought of as a companion document to be used in the implementation of M3UA to clarify errors in the original M3UA document. This document updates RFC3332 and text within this document supersedes the text found in RFC3332.


rfc3332
.txt SS7 MTP3-User Adaptation Layer (M3UA)

This Internet Draft defines a protocol for supporting the transport of any SS7 MTP3-User signalling (e.g., ISUP and SCCP messages) over IP using the services of the Stream Control Transmission Protocol. Also, provision is made for protocol elements that enable a seamless operation of the MTP3-User peers in the SS7 and IP domains. This protocol would be used between a Signalling Gateway (SG) and a Media Gateway Controller (MGC) or IP-resident Database. It is assumed that the SG receives SS7 signalling over a standard SS7 interface using the SS7 Message Transfer Part (MTP) to provide transport.


draft-ietf-sigtran-m3ua
12.txt
11.txt
10.txt
09.txt
08.txt
07.txt
06.txt
05.txt
04.txt
03.txt
02.txt
01.txt
SS7 MTP3-User Adaptation Layer (M3UA)

This Internet Draft defines a protocol for supporting the transport of any SS7 MTP3-User signalling (e.g., ISUP and SCCP messages) over IP using the services of the Stream Control Transmission Protocol. Also, provision is made for protocol elements that enable a seamless operation of the MTP3-User peers in the SS7 and IP domains. This protocol would be used between a Signalling Gateway (SG) and a Media Gateway Controller (MGC) or IP-resident Database. It is assumed that the SG receives SS7 signalling over a standard SS7 interface using the SS7 Message Transfer Part (MTP) to provide transport.


draft-hss-test-spec-m3ua
01.txt
00.txt
Test Specification for MTP3 User Adaptation

This document presents the test specification for M3UA (MTP3 User Adaptation) protocol (ver 05), which can be used to test M3UA implementations for conformance to the protocol definition. The list of test is exhaustive and covers almost all the categories of test. This draft can also be used in conjunction with M3UA specification by implementers of protocol as implementers guide, as the pictorial representation of various scenarios help easy understanding of the protocol.


draft-mahajan-test-spec-m3ua
01.txt
00.txt
Test Specification for MTP3 User Adaptation

This document presents the test specification for M3UA (MTP3 User Adaptation) prototcol (ver 02), which can be used to test M3UA implementations for conformance to the protocol definition. The list of test is exhaustive and covers almost all the categories of test. This draft can also be used in conjunction with M3UA specification by implementor of protocol as implementors guide, as the pictorial representation of various scenarios help easy understanding of the protocol.


draft-anshoo-test-spec-m3ua
02.txt
01.txt
00.txt
Test Specification for MTP3 User Adaptation

This document presents the test specification for M3UA (MTP3 User Adaptation) protocol (ver 10), which can be used to test M3UA implementations for conformance to the protocol definition. The list of test is exhaustive and covers almost all the categories of test. This draft can also be used in conjunction with M3UA specification by implementers of protocol as implementers guide, as the pictorial representation of various scenarios help easy understanding of the protocol.


draft-ietf-sigtran-m3ua-mib
08.txt
06.txt
05.txt
04.txt
03.txt
02.txt
01.txt
00.txt
SS7 MTP3-User Adaptation Layer (M3UA) Management Information Base using SMIv2

The MTP3-User Adaptation Layer is a protocol for the transport of any SS7 MTP3-User signalling (e.g., ISUP and SCCP messages) over IP using the services of the Stream Control Transmission Protocol. Also, provision is made for protocol elements that enable a seamless operation of the MTP3-User peers in the SS7 and IP domains. This protocol would be used between a Signalling Gateway (SG) and a Media Gateway Controller (MGC) or IP-resident Database. It is assumed that the SG receives SS7 signalling over a standard SS7 interface using the SS7 Message Transfer Part (MTP) to provide transport.

This memo defines the Management Information Base (MIB) module which describes the minimum amount of objects needed to manage the implementation of the SCTP.


draft-roque-m3ua-mib
01.txt
00.txt
SS7 MTP3-User Adaptation Layer (M3UA) Management Information Base using SMIv2

The MTP3-User Adaptation Layer is a protocol for the transport of any SS7 MTP3-User signalling (e.g., ISUP and SCCP messages) over IP using the services of the Stream Control Transmission Protocol. Also, provision is made for protocol elements that enable a seamless operation of the MTP3-User peers in the SS7 and IP domains. This protocol would be used between a Signalling Gateway (SG) and a Media Gateway Controller (MGC) or IP-resident Database. It is assumed that the SG receives SS7 signalling over a standard SS7 interface using the SS7 Message Transfer Part (MTP) to provide transport.

This memo defines the Management Information Base (MIB) module which describes the minimum amount of objects needed to manage the implementation of the SCTP.


Last modified: Sat, 01 Nov 2008 06:55:03 GMT  
Copyright © 2014 OpenSS7 Corporation All Rights Reserved.